Sunday, May 20, 2012

Reset Nokia Security Code With NSS pro


Nokia N97 Security Code
Previously, I've written how to recover a forgotten Nokia security code and reset Nokia security code using Nemesis Service Suite (NSS). Although NSS still works flawless for supported Nokia devices, this software has been discontinued. NSS unable to use Ovi Suite latest drivers. In addition, NSS it will show 'Scan for product....error' because of the unsupported drivers. There will be no more new updates for NSS. So it never will work for newer Nokia phones. However, there is a newer software called NssPro which supports newer Nokia devices. Most importantly, it works just like the NSS reset the Nokia security code.

You'll need:
  • Nokia PC Suite/Ovi Suite
  • NSS pro (Nokia Service Software)
  • USB data cable

Steps to reset Nokia security code:
  1. Install the latest Nokia PC Suite/Ovi Suite.
  2. Connect your phone to computer via USB data cable, and choose PC Suite or Ovi mode.
  3. Open NSS pro. UPDATE: Right click NSS pro, Run as administrator.
  4. Click Read Info and you will see your phone details on left side.
  5. To enter phone test mode. Choose Test Mode on bottom right and click the right arrow button (>) to reboot phone.
  6. Under Factory Settings, choose Full Factory and click Reset.
  7. Done.
  8. NSS Pro - Full Factory Reset

209 comments:

  1. "You might need to remove and put back the battery " !
    I have N8.
    What should i do?

    ReplyDelete
  2. I think it means remove the battery so that the phone is totally off with no battery power.


    Where did you find these words from?

    ReplyDelete
  3. Thanks a lot buddy..it worked for me
    C6-01-Belle

    ReplyDelete
  4. Thanks a lot buddy..it worked for me
    C6-01-Belle

    ReplyDelete
  5. Thank you very much for the feedback. ^_^

    ReplyDelete
  6. When I put on local mode and then '->' it does not reset nor when i click 'full factory' and then 'reset', I have an E71, what can I do?

    ReplyDelete
  7. i have nokia 5530 xp and i want to unlock my phone security code.when i click on Read info it shows phone not found any kind of help form u plzzzzzz i m w8ing

    ReplyDelete
  8. its not working on my nokia c5-05

    ReplyDelete
  9. It says "Phone not found."
    What should i do? Help pls. Thanks!

    ReplyDelete
  10. hi there, I've got it working now!!! you guys have to run it as a ADMINISTRATOR then just follow the steps as above, it worked in my n8. Good luck guys.

    ReplyDelete
  11. after this, will i lose all my data on my phone?

    ReplyDelete
  12. hi there. when I put my phone on test mode. It turn off not reset. Cannot do the factory reset because it tells me that "phone not found". please help me. Thanks.

    ReplyDelete
  13. What is your phone model? Did you run NSS Pro as administrator?

    ReplyDelete
  14. Hi Lemon I have a nokia E72 RM-530 and have followed the instructions to reset the security code with NSS Pro. After I put the phone into test mode and try to run the factory reset it says "Init connection...Phone not found". Do you know what the problem could be and the solution to this problem? I appreciate the help. Andy

    ReplyDelete
  15. Hi, please backup your data with Nokia Suite before proceeding.

    ReplyDelete
  16. Thank you Georgeldn123 . I will update the instruction.

    ReplyDelete
  17. hey admin,,,,i have a nokia c7-oo and its like phone not found...i did run it as an admin...please help

    ReplyDelete
  18. hey i've an old nokia 3120c ...will this software will unlock my phone

    ReplyDelete
  19. i was nt able to regain control on security code of my E5

    ReplyDelete
  20. so far the test mode work with my nokia c7 but at the rest factory settings it stops working :(
    Init connection...Phone not found. thats the error it gives

    ReplyDelete
  21. thank-you it work for me .:d

    ReplyDelete
  22. Checking selection...Done.
    Init connection...Phone not found.
    after i picked full factory . and i think not only me got this can u help us plz

    ReplyDelete
  23. If NSS says "Phone not found" when it is in test mode, unplug the usb and put it back and then hit reset and it should work.

    ReplyDelete
  24. Hey thanks lemon its working on my nokia 5800 xpress....thanx a lot.....^_^

    ReplyDelete
  25. mine phone is not detecting bye the nss pro ,
    wat should i do

    ReplyDelete
  26. Hi , I followed your guide on " find back forgotten security code " to the letter ignoring the 3's turned phone off and on again, entered the acquired code, and was greeted with wrong security code.. doh... tried the reset routine press yes, and ......... nothing no reset to 12345, and retrieved still won't work. I was banking on this working, any ideas what to try now ?

    ReplyDelete
  27. How about. I can't connect to the pc 'coz i forgot my security code password to unlock the keypad:o How to unlock it?

    ReplyDelete
  28. if you are using windows 7, set the compability settings to windows xp and it'll detect your phone.

    ReplyDelete
  29. nothin is workin..still say phone not found...please email me kav1992@yahoo.com

    ReplyDelete
  30. NSSPro 0.50 + N8-00 and after Test mode step: "Checking selection...Done.
    Init connection...Phone not found." Something wrong with my test mode? I already connect and disconnect the test mode, and on the screen appear "Test mode 111.030.0609 NOKIA" above black screen. What i do?

    ReplyDelete
  31. I'm using Nokia N8.
    I'm trying to use NSS Pro, but it says "Phone not found". What should I do?
    I'm using Windows 7 and how to set the compatibility setting to Windows XP?

    ReplyDelete
  32. Thanks. Factory reset. Nokia E72 M-530.

    ReplyDelete
  33. i followed the instructions, connect the phone, open nss pro and hit read info, the infos came out but whn i select to put it into test mode, nothing seems to be happening, i continued by pressing reset after i selected the full factory setting, my phone isnt restarting and i still cant use 12345 (default code) to hard reset my phone, help pls? thxx alot

    ReplyDelete
  34. i tried it i got n97 but when i went with test mode and put full factory and then click reset and i got Init connection...Phone not found.

    ReplyDelete
  35. thank you it worked perfectly on my n8 :)

    ReplyDelete
  36. Hey lemon, My phone, Nokia N82 has a lock code and i can't switch it on without the lock code. It is stuck at that point where i have to put the lock code for the phone to start

    ReplyDelete
  37. I have a nokıia 2700 classic ı ınstal Nss pro and I follow your ınstructıon but Nss pro asked phone not connect. than I connect usb to computer so mobıle say Unlock securıty code to connect USB. But ı forget the securıty code. Can u help me to How can connect USB...

    ReplyDelete
  38. This solution works perfectly. I had a problem with the message - "Init connection...Phone not found". But my solution was just to unplug usb cabel and plug it back in and the the phone was found then, i clicked again reset button in nss pro and it reseted my phone to default settings.

    ReplyDelete
  39. how to connect on pc mode as my phone won't open as i forget my lock
    password

    ReplyDelete
  40. mine is same problem how to unlock..

    ReplyDelete
  41. Sorry, Is that a yes or a no? And what about applications and games? Will that get wiped?

    ReplyDelete
  42. If you don't find your phone close all Nokia Suite applications.

    If the test mode is not reconized -> phone not found.
    You can try plug in the phone right after you started the resest.
    I worked for me.

    good luck

    ReplyDelete
  43. This is amazing. Thank you so much.

    ReplyDelete
  44. hy,i tried to unlock my nokia,its a c5-00,i use your metod,but he don't restore to factory seetings,what should i do?sorry for my language

    ReplyDelete
  45. i have Nokia 500 with Symbian Belle, I have tried every thing mention but dont work, it says "Init connection...Phone not found" i unplugged and connected again and reset again, but again same error.
    What should i do, plz help

    ReplyDelete
  46. I reseted my locked E72 RM-530 with Phoenix software succesfull. Download firmware files (with navifirm) and copy then to phoenix, file/open product, flashing/firmware update, chose product code (if you cannot see anything be sure that you have right firmware files in right place), dead flashing on, push SW reset, do what program tell to you (remove batter, insert usb blaa blaa). If progress don't start flashing after that (didn't start with me) try reinstall phone battery. More information (also unnecessary) from there: http://www.mobilephonetalk.com/showthread.php?20542-How-To-Flash-Dead-Phones-Using-Phoenix-Or-JAF-Service-Suite

    ReplyDelete
  47. my n8 dead trying to full factory reset with nss pro

    ReplyDelete
  48. You sir are a legend!

    Worked perfect on n8. (Win7 64bit)

    Just needed to unplug and plug the usb one time to be able to do the reset in Test-mode.

    Thx!

    ReplyDelete
  49. hey,how did u get the phone off test mode

    ReplyDelete
  50. mine wont switch on...there is test mode on the phone screen...what to i do?

    ReplyDelete
  51. hey did u get it to work....mine is dead too...just a blank screen...wont switch on

    ReplyDelete
  52. hey it worked....i figured it out

    ReplyDelete
  53. Hi, You guys are the bomb. Great. it worked. For all getting the "Phone Not found" When in still in test mode and fin full factory, remove the usb, click reset then reinsert the usb as fast as u can. worked for me..

    Thanks to all of you.

    ReplyDelete
  54. Full Factory? Does this mean the unit loses everything and reverts to "out of the box" status? I just wanna reset the Security Code...:/

    ReplyDelete
  55. i have Nokia 500 with Symbian Belle, I have tried every thing mention but dont work, it says "Init connection...Phone not found" i unplugged and connected again and reset again, but again same error.
    What should i do, plz help

    ReplyDelete
  56. This is the way to erase your previous security code. If your phone is not locked by security code, you can backup the phone's contents first with Nokia Suite.

    ReplyDelete
  57. Thanks for the tips and congrats resetting your phone working as new. :)

    ReplyDelete
  58. Thank you for sharing too. It would answered a lot of readers' question.

    ReplyDelete
  59. if i follow the above steps is it total reformat? need to reinstall everything after that? :/

    ReplyDelete
  60. Yes. If you would like to try your luck to recover your security code before following the guide above, you may refer here. Reset phone is the last resort if that doesn't work for your phone.

    ReplyDelete
  61. "Checking selection...Done.

    Init connection...Done.

    Checking phone mode...Done.

    Resetting defaults...Done.

    Please wait few minutes for the phone to reboot.

    If it's stuck in white screen, you will have to remove the battery."

    after that the phone reboots but it is not reset.

    ReplyDelete
  62. "You might need to remove and put back the battery"
    I'm using N8, does it really necessary to remove the battery? If I don't, will it harm to my phone?

    ReplyDelete
  63. Worked like a charm for my Nokia 5530. Thanks a bunch!

    ReplyDelete
  64. how this going to work if i stuck at entering security code. how to connect to pc suite...??

    ReplyDelete
  65. The method on this page only works before the phone is locked. Flashing your phone might be the only way.

    ReplyDelete
  66. thanks a lot dude.....:-D

    ReplyDelete
  67. Checking phone mode...Wrong mode! when trying to reset a Nokia E52. What am I doing wrong?

    ReplyDelete
  68. i am using nokia E72. when i click read info it says phone not found what should i do?

    ReplyDelete
  69. Thank you very much,,,! It worked on my E63...! i followed the main instruction together with the comment from shala "Hi, You guys are the bomb. Great. it worked. For all getting the "Phone
    Not found" When in still in test mode and in full factory, remove the
    usb, click reset then reinsert the usb as fast as u can." i really appreciate you guys effort.....! i pray other people to see this comment of mine and use it to also solve their problem too...!

    ReplyDelete
  70. It worked great stuff

    ReplyDelete
  71. you saved my n8 .... thank you both ...

    ReplyDelete
  72. thank you bro.. reinserting the usb does work..thanks a lot

    ReplyDelete
  73. Fantastic!!! Thanks much keyables.com & Shala :)
    Love You :)

    ReplyDelete
  74. Arre dude me using X2 01 I have forgotten my security code....so when i connect USB it says unlock to enable USB:'(

    ReplyDelete
  75. BLOODY LEGENDS ! And yup SHALA thanks for the help regarding phone init msg! awesome work fellas!

    ReplyDelete
  76. Unlike to others who works, your phone is already locked. Flash your phone could be the alternative.

    ReplyDelete
  77. Thank you for the feedback regarding the Init connection error message.

    ReplyDelete
  78. Thank you for the kind words. :)
    Shala's comment is on top of the best comments currently. :)

    ReplyDelete
  79. thank u it workd :))

    ReplyDelete
  80. You guys rock! It was simply outstanding, never even imagined my N8 was just a few clicks away to come back in action...merci! The "Phone not found" thing also happened in my case, you just have to disconnect the cable while the phone is still in test mode, disconnect the USB, click reset, then OK in the dialog box that comes (trust me, nothing will happen), then after seeing "ini Connection" connect the USB cable back, thanks to Shala for his post. Loads of thanks and wishes sir! :-)

    ReplyDelete
  81. Congrats your phone is back in action! :-) Thanks for your info too. Now we confirm it works on Nokia N8.

    ReplyDelete
  82. It is working fine for me..

    Thanks.

    ReplyDelete
  83. Hi thar after choosing test mode may n8 screen changed to test mode then i choose full factory and i clicked reset and now it says

    Checking selection...Done.

    Init connection...Phone not found.

    ReplyDelete
  84. Hi Alex, Shala's comment has a solution for this issue. While the phone is in Test Mode, remove the USB and click Full Factory's Reset. Then plug back the USB immediately.

    ReplyDelete
  85. Hi all. I have one problem. When i start test mode everythink it ok, bu when i try select full factory resset an when i press reset button i got eroro in left side window Init connection... phone not found... i got nokia 500 (rm-750) and i want to reset main cerurity code to defaul: 12345. Any body know how to do that? Please answer here or PM to email Veselismantas@gmail.com

    ReplyDelete
  86. Hi, please refer to Shala's comment. That should solve it. Good luck.

    ReplyDelete
  87. It dont freaking work :|

    ReplyDelete
  88. Hii

    heyy Guys

    can u tell me why error come in nss pro.....like When i connect my pne to pc then open nss pro software ....after that m choose read info otn but pne not fonud error will come???

    ReplyDelete
  89. plz help me admin NSS pro dose not show full in my desktpo its only shows half size . what i do plz reply me (nadeemk810@gmail.com ASAP

    ReplyDelete
  90. dude.... its always saying phone not found when it is in test mode and i m not able to do full factory reset...please hlp!!! or any oher method to reset lock code....... :(

    ReplyDelete
  91. I forgot my c2-02 security code. I can't access the pc suite mode on the phone cause the it needs to be unlocked first. How can i make it to be recognized by nss.

    ReplyDelete
  92. After I went to the test mode the screen froze and after a while it turned off and won't open so is there any solutions or the phone is dead and I should look for another phone, i hope there is a solution.

    ReplyDelete
  93. mine went off and wouldn't start again am using Nokia X7-00, is there any solutions for this problem?

    ReplyDelete
  94. you saved my X2.... thank you

    ReplyDelete
  95. thanks mate,,, good job on the "phone not found" thing,,,

    ReplyDelete
  96. worked on my nokia c5-00

    ReplyDelete
  97. guys you are the best!!!

    ReplyDelete
  98. After I click on the reset button i get this error-

    "Checking selection...Done.

    Init connection...Done.

    Checking phone mode...Done.

    Resetting defaults...Error!"

    Someone please help me.
    If you know the solution please Email me- jeevan.or.g1@gmail.com

    ReplyDelete
  99. dude its showing Init connection...Phone not found. after facorty resest

    ReplyDelete
  100. Init connection...Phone not found. showing error after factor reset done

    ReplyDelete
  101. I already solved my issue Thanks man... Great toooool :-P

    ReplyDelete
  102. thanks bro it worked on my nokia n8 , thanks

    ReplyDelete
  103. hello friend. i hav been desparately trying to unlock the security code of my nokia 6300 since last 20 days, but in vain. however i saw a ray of light by using ur software but it says 'Checking phone mode...Wrong mode!
    Please set the phone in Test mode, wait 60 seconds and try again.wrong mode'.kindly guide me please. thanks

    ReplyDelete
  104. awesome ! simple ! fast !
    i love the internet !
    thank you for shearing this info

    ReplyDelete
  105. Hey Peeps, ive got a N8, but im having that problem with the phone not found, ive done what shala has said but still nothing, it picks up and then says error, any advice please

    ReplyDelete
  106. hai...the msg 'phone is not found' is coming tried both battery and reconnected usb, nothing happened.anybody if knows something what can i do,pls help...

    ReplyDelete
  107. phone not found' is showm.tried all ways what to do? anybody der?

    ReplyDelete
  108. thanks so muchhhhhhhhhhhhhh

    ReplyDelete
  109. hi it didn't work for me i use nokia E6-00, i was able to read info but couldn't reset factory it shows phone "not found"

    ReplyDelete
  110. if it shows Not Found try to remove the usb, click reset then reinsert the usb as fast as u can

    ReplyDelete
  111. ohh ! it worked thanx you

    ReplyDelete
  112. Worked for my E71. Thanks alot!

    ReplyDelete
  113. Worked wonders the pull out usb press reset recoonect usb nice thanks

    ReplyDelete
  114. MY telephone just blacked out. Now Im thinking of giving it...

    NEVER TRY THIS ON X7... fuck that

    ReplyDelete
  115. Amazing tool! I tried to get back my code but no success on my C7. Anyway, i reset it, worked like a charm. Installed back my datas from backup. You guys saved me a lot of time and money (here they want to be payed to reset your Nokia!) thank you very very much :)

    ReplyDelete
  116. Thank you so much. This worked for my Nokia C7 as well.

    ReplyDelete
  117. Great....... It really worked........ Thank you so much.............

    ReplyDelete
  118. yeeeeeesss it works with nokia n97 mini!!!!!!!

    you mut click reset,and than you unplug and replug the usb cable very fast and you wait and you're fone will reboot ^^

    ReplyDelete
  119. nice boss...
    its working, after this lock automatically came to "12345" on my E71

    ReplyDelete
  120. it's work really nice post!!!!!!!!!!!!!!!!!!!!!!!!!

    ReplyDelete
  121. God bless the makers of the application.. Very very useful.. I nearly threw the phone away till i found this post.. Thank you soo much

    ReplyDelete
  122. it really help me i'm using nokia C5-00 ^^

    ReplyDelete
  123. hae my phone iz locked with security coad so plz say me to unlock

    ReplyDelete
  124. thank you so much you guys rock you saved my nokia c5-06...... at first i expirienced a phone not found problem but thanks to the comment and advice from shala it worked.......................

    ReplyDelete
  125. It says phone not detected, what should i do? i'm removing my lock code cause i forgot it.

    ReplyDelete
  126. I got a question. My phone is Nokia 5300. I forgot my security code and I can't access my phone and connect to pc. What should I do? and I did not backup my data in the phone, if I use this software, will my data be clear off?

    ReplyDelete
  127. Dear Charmaine,

    It sounds like your phone is already locked. I suggest you flash your phone. Thank you.



    Best regards,
    Mok

    ReplyDelete
  128. worked on my n8..........was searching for this solution for a long time.......thanks

    ReplyDelete
  129. Dear Mok,

    What u mean about flash phone?

    Sent from my HTC

    ----- Reply message -----

    ReplyDelete
  130. Hmm...how to do that? Will this action clear all the data in my phone? Cause there are some important things in my phone...
    Subject: [keyable] Re: Reset Nokia Security Code With NSS pro | Keyables

    ReplyDelete
  131. It will clear all the data in phone memory. Have you backup the data in memory card?

    ReplyDelete
  132. thank god, man it really works....

    ReplyDelete
  133. guys, you're awesome. It worked in my nokia 5230. Thanks so much.

    ReplyDelete
  134. thnku very very much it worked...:)

    ReplyDelete
  135. You guise are awesome. Fucking awesome, it really works. Love u a lot. Fists it was showing phone not found. Then i remove usb clic reset and insert it back then it worked. Thanx.

    ReplyDelete
  136. U guys rock! Thanks a ton!! U saved my phone.

    ReplyDelete
  137. Checking selection...Supported(USB) interface selected.


    Init connection...Phone not found.

    ReplyDelete
  138. Thank u so much ..... it worked with my N8..... perfect :)

    ReplyDelete
  139. Thanks. It helped for my E63.

    These are my steps
    1. Choose "Test" Mode on bottom right and click the right arrow button (>) to reboot phone.
    2. The NSS will hang and closed, but my phone is still in "Test" mode. I relaunch the NSS.
    3. Under Factory Settings, choose Full Factory and click Reset.
    4. NSS will read the info itself and reboot. Done.

    You can try to reset again by using "1234" as your security code.

    Thanks again.

    ReplyDelete
  140. Hello Sir,


    I have nokia E-71.I wanna reset Full Factory settings.I have tried this but when phone restarted i see test mode on my phone screen. when i choose full factory and then reset. there is an erorr that phone not found. can u help me for that.
    I shall be very thankful to you.

    ReplyDelete
  141. thanks a lot man you are a genius

    ReplyDelete
  142. Hi, Guys I am Using Windows 8 and nss stop working every time when i read info what can i do plzz rply

    ReplyDelete
  143. ur the men guyzzzzzzzzzzzzzzzzzz.........................i really appreciate u people....hope that any person having this problem be fix with this nss pro...you guyzzz are the best..............

    ReplyDelete
  144. this app is so good... thanks for this it work for my Nokia N8..

    can this app also help me cause my n8 is simlock..

    but thank you for this app and to the author keep sharing and helping..

    ReplyDelete
  145. Hi,
    I have a problem
    I use a security code for my ASHA 200 but as I changes the language phone get locked and that same code does not works due to language change.Even Sim pin does not works.
    Any suggestions plz??

    ReplyDelete
  146. Even NSS pro not detect my phone,.

    ReplyDelete
  147. Bro need urgent plzzzz reply

    ReplyDelete
  148. LOL it works on my E72 ii lovee uuuu

    ReplyDelete
  149. Hi, i was able to successfully reset factory settings but still it shows code error when i try to change the code.. Pls help!!

    ReplyDelete
  150. i have a nokia E72-1 RM-530

    ReplyDelete
  151. yaar,thank u very very much....!!! frm bottom of my heart

    ReplyDelete
  152. man, seriously u are a atom bomb, thanks thanks thanks cant stop saying thanks....

    ReplyDelete
  153. can u use this even when the phone is locked?

    ReplyDelete
  154. PERFECT !!!
    Works for Nokia E63.

    For all who get problems like:
    1. clicking "Read info" shows "Phone not found".
    2. clicking "Reset" shows "Wrong mode, retry in 60 seconds".
    3. clicking ">" does simply nothing.

    Here is the Step by Step guide :

    1. Connect phone to PC with USB cable. Remember to choose PC suite mode.

    2. Click "read info". If it shows "phone not found" then click again on "read info" and this time when "init connection" appears, quickly remove the cable and insert it back. Phone details will be displayed.

    3. Select "Test mode" in the bottom right side and click ">". If nothing happens for 10-12 seconds then click "Abort". Again Click ">" and after 2-3 seconds quickly remove USB cable and re-insert. After a gap of probably 3-4 seconds the phone should go dark, but it won't switch off actually, if you tilt the screen a bit and see it in light reflection, you'll see written "test mode, NOKIA". You are now in Test Mode.

    4. Select "Full Factory" and then click "Reset". When "init connection" appears remove the cable and re-insert. The phone will reboot and the defaults will be reset.

    ReplyDelete
  155. It would not work. Flashing the phone might help.

    ReplyDelete
  156. That's a great additional of input for Nokia E63 @0e40b4d891e250dc74ac354967bf62f6. Voted up, thank you.

    ReplyDelete
  157. I have nokia 5230 aswell. I forgot my lock code pass-code so it wont open now! Tried doing all of the above but it keeps on saying "Init connection...Phone not found.".
    What to do??

    ReplyDelete
  158. When you reached step 6, select Full Factory under Factory Settings. Disconnect the USB cable. Click Reset and then replug the USB.

    ReplyDelete
  159. Thank could take back my security code.

    ReplyDelete
  160. is it work in nokia c1-01....?

    plz reply me in nishad.lalit007@gmail.com

    ReplyDelete
  161. @green_lemon i have nokia 500, when i start it, it asks for security code which i dont kno, so how can i connect my phone in ovi ??

    ReplyDelete
  162. Yes, NSS supports Nokia C1-01.

    ReplyDelete
  163. I would suggest you to flash your phone since it is already locked and blocking any unauthorized access to it.

    ReplyDelete
  164. bt sir it says "phone no found" wt can i do plz plz reply.......

    ReplyDelete
  165. you are the bomb bro

    ReplyDelete
  166. IT CANT WORK WITH X2 IT SAYS PUT PASSWORD FOR USB TO WORK AND ITS THE THING I WANT TO REMOVE SO HOW CAN I GET READ OF THAT CAUSE IF I PUT AN UNLOCKED X2 ITS READING CAUSE I WILL CHOSE PC SUITE

    ReplyDelete
  167. yayyyyyy.....Thanks a lot....cheers! it's really work done on 'Security Code Error after updating belle on my Nokia N8-00'' by Full Factory Reset of NSS pro as your instruction step by step, ''I don't need to remove battery'' after reboot. N it was completely worked and fixed the security code error on my Nokia N8-00.
    Thanks n ratting u 5 star. :)))

    ReplyDelete
  168. GREAT!!! IT WORKED LIKE MAGIC. THANKS A MILLION.

    ReplyDelete
  169. Awesome man!! thanks a lot !

    ReplyDelete
  170. bro but i when i scan it give me "Scan for product...error"

    ReplyDelete
  171. i have N8 and i forgot the security code plz hlp

    ReplyDelete
  172. you are a magician nothing but this worked

    ReplyDelete
  173. when my phone goto test mode>>> i press reset button with full factory but it showss>>> phone not found

    ReplyDelete
  174. man, you're awesome!!

    ReplyDelete
  175. I followed everything, this appeared and my phone's screen went black..what to do? help please..



    Checking selection...Supported(USB) interface selected.
    Init connection...Done.
    Reading imei...Done.
    Reading pm range 0 - 400:
    Found Section 1 - 27 keys
    Found Section 2 - 1 keys
    Found Section 4 - 6 keys
    Found Section 8 - 8 keys
    Found Section 11 - 5 keys
    Found Section 12 - 1 keys
    Found Section 26 - 2 keys
    Found Section 31 - 1 keys
    Found Section 44 - 1 keys
    Found Section 50 - 1 keys
    Found Section 54 - 2 keys
    Found Section 88 - 1 keys
    Found Section 96 - 2 keys
    Found Section 107 - 6 keys
    Found Section 117 - 11 keys
    Found Section 120 - 4 keys
    Found Section 153 - 7 keys
    Found Section 193 - 4 keys
    Found Section 217 - 1 keys


    Error Next Key!

    ReplyDelete
  176. This worked. Thank you..However, whenever I try to do the "Read" step my phone's screen goes black and on the NSS window it says there "Error Next Key!"..so I kept pressing the power button ,nothing happens (just black screen) and the only choice for me is to remove the battery and put it back for it to boot up.. Help please.. :(

    ReplyDelete
  177. i love you guyz, how i wish there is any better to say THANK YOU

    ReplyDelete
  178. Thank you so much!!!!

    ReplyDelete
  179. Thanks for the nice information.
    I suffered a lot after missing my security code.
    This is really awesome.
    Thanks a lot for the nice info once again

    ReplyDelete
  180. tnk .....u guide us..like a boss.........ur the man

    ReplyDelete
  181. this really works on my e72 phone.. good job man i tried many unlocking/ resetting tutorials but this one works 100%

    ReplyDelete
  182. i can not understand seitting plz help me

    ReplyDelete
  183. Thanks a lot! This worked for me on N8!

    ReplyDelete
  184. Thanks. It works like majic!

    ReplyDelete
  185. hey thanks man K.... im so proud of myself XD,,, because its WORK

    ReplyDelete
  186. Will its works on my nokia x2-01
    I forgot my password

    ReplyDelete
  187. you guys are awsommeeee i tried lot many ways to recover my password..Finally it worked for my nokia 5233....

    ReplyDelete
  188. Hi everyone, my problem is that my N8 is turned off with security code preventing me from turning it on. And it seems it won't connect unless I can do so (which is especially annoying since I know the security code I've been using for ages, no idea how it suddenly became invalid).


    Is there any way around it? I read about removing the battery, which seems difficult, but I'd try if I was sure it'll do any good. Will it?

    ReplyDelete